Painting and markings:
Originally, when the Seeschwalbe was still conceived as a fighter, the model was to receive a daylight scheme in typical German naval aircraft colors (RLM 72/73/65). But this plan changed when the aircraft’s role became a ‘special purpose’ transporter for covert operations.
Nocturnal operations appeared plausible, so that the scheme became much more murky: from above, a splinter scheme with RLM 73 and RLM 74 (naval dark green and dark, greenish grey, both from the ModelMaster Authentic enamel paint range) was applied as a basis, and the undersides became black – as if standard daylight colors had been overpainted, a frequent practice.
Since this black paint was made from soot, it easily wore away and many Luftwaffe machines with improvised black undersides quickly gained a rather shaggy look. I wanted to re-create this look, and built up the lower paint accordingly: In an initial step, RLM76 (I used Humbrol 87, which is a tad darker than the RLM tone, for less contrast with the black) was painted on the lower wing surfaces, the fuselage with a medium waterline and the fin. Once dry, the national marking decals were added. Then a coat of thinned Revell Acrylics 6 Tar Black was applied on top of the lower surfaces, including the lower decals, and later wet-sanded in order to reveal some of the grey underneath for a worn look.
In order to break up the aircraft’s outlines, esp. at low altitude, a disruptive meander pattern in light grey (RLM 76) was painted on top of the upper surfaces. For this task, I thinned Humbrol’s 247 enamel and used a simple brush, painting the curls free-handedly. The finish looks pretty convincing, and it mimics well the technique with which those improvised patterns were applied in the field in real life: quickly, with anything at hand. The way the finish turned out, the pattern could have been applied with a broad brush – the use of a spray gun was rather uncommon, and IMHO the use of an airbrush on a model to recreate such a zigzag pattern rarely leads to convincing results?
This pattern was painted tightly around all the upper markings, and the markings themselves were kept at a minimum. For instance, the tactical code only comprises the aircraft’s individual letter “Blue O” behind the fuselage cross, which indicates an air staff machine. This would, following the official German squadron code system, be confirmed by an “A”, following as a fourth digit. The squadron’s code (“P7”, which is fictional, just like the aircraft’s sea reconnaissance squadron itself) was omitted, too. Such minimal markings became a frequent practice towards the final war stages, though, and it fits the aircraft’s special duty role well. The only individual marking is a squadron badge under the cockpit – lent from an Italian night fighter and placed on a dark blue disc. Another, subtle indicator for the aircraft’s operator are the blue air intake center bodies, repeating the staff flight’s blue color code.
Only some light weathering was done, with dry-brushed light grey on the leading edges, and finally the kit was sealed with matt acrylic varnish (Italeri). In a final step, some very light dry-brushing with aluminum was done on some of the fuselage edges, esp. the spray dams, and the position lights were painted with translucent paint over a silver base.